Blue Glue -Band Cements
Regular price
$69.99
Sale price
$49.99
Unit price
per
Description:
1.Designed for bonding of metal and orthodontic ceramic brackets on enamel.2.It is of high viscosity and thus prevents bracket drifting and reduces material waste.
3.As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained.
Feature:
This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
It contains fluoride to reduce the chance of declacification.
Mini Packing:
1 x Syrings(5g each)paste .
1 x Syring(2.5ml)Etchant Gel.
Accessories instruction .
1 x Syring(2.5ml)Etchant Gel.
Accessories instruction .
Only Paste:
1 x Syrings(5g each)paste .
Instructions:
A Tooth Preparetion:
1 Prophhy teeth with oil-free pumice or paste .Rinse with water .
2 Isolate teeth .
3 Air dry thoroughly using oil and moisture -free air source .
B Acid Etching :
Apply ORTHO-BONDING Etching Gel to tooth ,surfaces following the instructions provided with the etching gel delivery system .If using other gel etching systems consult the manufacturer's instructions for proper technique and recommend etching times .
C Priming :
1 Air dry tooth thoroughly .
2 Place small amount of ORTHO-BONDING primer in well .
3 Apply thin uniform coat of primer on each tooth surface to be bonded .
Note :since ORTHO-DONDING Primer acts as a wetting agent ,only a very film or primer is neceaasry .
D Adhesive Bonding :
With the syringe apply a small amount of ORTHO-BONDING adhesive paste onto bracket base .Use sparingly .
When completed wipe sryinge tip clean and replace cap .
E Placements and curing :
1 Immeditely after applying adhesive ,lightly place bracket onto teeth surface .
2 Adjust brackets to final position ,press firmly to seat brackets .
3 Gently remove excess adhesive from around the brackets base without disturbing the bracket.
4 Hold the curing light stationary at a distance 2-3mm to light about 10 seconds in each bracket's left and right .
A Tooth Preparetion:
1 Prophhy teeth with oil-free pumice or paste .Rinse with water .
2 Isolate teeth .
3 Air dry thoroughly using oil and moisture -free air source .
B Acid Etching :
Apply ORTHO-BONDING Etching Gel to tooth ,surfaces following the instructions provided with the etching gel delivery system .If using other gel etching systems consult the manufacturer's instructions for proper technique and recommend etching times .
C Priming :
1 Air dry tooth thoroughly .
2 Place small amount of ORTHO-BONDING primer in well .
3 Apply thin uniform coat of primer on each tooth surface to be bonded .
Note :since ORTHO-DONDING Primer acts as a wetting agent ,only a very film or primer is neceaasry .
D Adhesive Bonding :
With the syringe apply a small amount of ORTHO-BONDING adhesive paste onto bracket base .Use sparingly .
When completed wipe sryinge tip clean and replace cap .
E Placements and curing :
1 Immeditely after applying adhesive ,lightly place bracket onto teeth surface .
2 Adjust brackets to final position ,press firmly to seat brackets .
3 Gently remove excess adhesive from around the brackets base without disturbing the bracket.
4 Hold the curing light stationary at a distance 2-3mm to light about 10 seconds in each bracket's left and right .